Get your PC running like new in minutes!
Sometimes your system may generate an error code with emus bms control panel message. There can be several reasons for this problem.
What’s new in control panel firmware 220.127.116.11: — When opened and shortly after every hour of operation, the specific control panel now connects to the Internet to check if a newer controller firmware model is available. If a newer version is found, the primary user will be notified by a tooltip in the toolbar.What’s new in control panel firmware 18.104.22.168:- pressing “Cancel” even if the choice of the log file directory leaves the previously selected setting, and does not come from all the default settings of the log file directory;- Fixed a bug where configuration loading from a file with access level 1 did not work;- Implemented communication with the Emus BMS control unit via the Emus BMS Bluetooth smart module with a BLED112 key;- Added separate external components page for faster access to all operations related to Emus BMS display module and Emus BMS Bluetooth smart module;- New small screen;- Some small performance fixes.What’s new in control panel firmware 22.214.171.124:- Bug fixed Due to which the parameters “Min. PWM output” and “Max. PWM output” were not displayed when using controller firmware with support for analog symptom-driven chargers;What’s new in control panel firmware 126.96.36.199:- Estimated maximum capacity parameter increased to 6553.5 Ah.What’s new in control panel firmware 188.8.131.52:- Added widgets for configuration, settings statistics and actions related to undervoltage protection of the package introduced in version 184.108.40.206 of the control unit firmware.What’s new in control panel firmware version 220.127.116.11:- Updated display block settings dialog;- “Export and statistics” and “Import statistics” actions are now disabled if you are not connected;- The “Cells” tabs and therefore the “Charger” tabs on the configuration page have been merged into one “Charger” tab. The Maximum Allowable Voltage, Minimum Balance Range and Allowable Voltage widgets will be hidden if your control unit firmware version is greater than or equal to 18.104.22.168, because they are filled elsewhere or if one Our respective configuration options are missing. used;- The load curve image has been redrawn to often reflect actual settings, which means using a less intrusive color palette. This mod is versioned, since the firmware version of the attached control unit is older, the demand curve image and the surrounding widgets will no doubt be displayed as definitely up to date for this version;- Hidden the “Charger type” parameter widget if the control unit version is much higher than 22.214.171.124 and updated all related code accordingly as this manual parameter is no longer used;- Added the Neuro “Broadcast TM4 Messages” checkbox on the “General” tab of the “Configuration Description” page, as this is a separate support from the firmware brand 126.96.36.199 of the control unit;- The “Charger connected” flag is now symbolized when a control unit with firmware version 188.8.131.52 or higher is definitely connected;- The appearance of the Control Panel application window is now less consistent with the OS-style widget;- I/O interfaceThe Gate and Set/Reset Password has been updated to support the second password function introduced in the control unit firmware version 184.108.40.206. Removed light background from update page templates for better viewing, as this page is now incompetent when logging out;- Updated “Pulse per unit distance” widget to support a four-byte time parameter instead of a two-byte infinite parameter, taking into account the inversion introduced in version 220.127.116.11 of the control unit firmware;- Added the “Number of connected chargers” status to the “Charging” group field of the “General” tab of the main status page, taking into account exactly this change made in version 18.104.22.168 of the control unit firmware;What’s new in control panel firmware 2.2.3_RC11:- Manually exported stats are now usually saved in a different web directory than the one saved just before the firmware update, meaning they are unlikely to be lost after a firmware update;- Methods “Export statistics” and “Import statistics” are now disabled when loading,Firmware update when the panel is not connected to the control unit, or when connected to a specific control unit in bootloader mode;- Fixed a bug due to which some characteristics were often cleared after import;- Security widget tooltip “No current sensor” is now correct;What’s new next to the control panel firmware 2.2.3_RC10- All certain widgets on the update page where the word “Software” was found have been renamed and now contain the word “Firmware” to avoid confusion.- Menu actions in the menu located on the navigation bar in the upper left corner of the panel window now correctly display tooltips;- Implemented procedures for Nintendo Wii game statistics and some non-volatile states for the hard drive and their buyback to the control unit. They are launched automatically when the controller firmware is updated, but can even be launched manually using the “Export statistics” and “Import statistics” actions, which are often added to the “Options” menu when it is necessary to transfer statistics to a computer.addition to non-volatile reserves. states from one control unit to another is desirable. It is only important to note that researches and non-volatile states are correctly transferred to the control unit, just like the control unit crashes only after firmware version 2.0.20_RC1;- with the addition of the fact “Heater relay activation account”. Displayed only if the specific firmware version of the connected control unit is 2.0.20_RC1 or higher;- Now when a panel with production firmware 2.0.20_RC1 or higher is integrated into the control unit and the response of one (or more) of the safest stats has been reduced, basically the default choice, the value of this statistic is displayed overflowed constantly as kAh, kWh or h with more than one decimal place instead of Ah, Wh or s;- If the panel is connected to the latest control unit with registration firmware 2.0.or 20_rc1 above, “Last trip average consumption” and “Estimated remaining mileage based on last trip” are also displayed during status.
¿Cómo Arreglar El Panel De Control De Emus Bms?
Come Riparare Il Pannello Di Controllo Di Emus Bms?
Comment Réparer Le Panneau De Contrôle Emus Bms?
Hur Fixar Man Emus Bms Kontrollpanel?
Wie Repariert Man Das Emus Bms Control Panel?
Jak Naprawić Panel Sterowania Emus Bms?
Как починить панель управления Emus Bms?
Hoe Het Emus Bms-bedieningspaneel Te Repareren?
Emus Bms 제어판을 수정하는 방법?
Como Consertar O Painel De Controle Do Emus Bms?